Do you have a Pool Leak?
Don't Wait - Prepare your pool for summer today!
Constantly refilling the pool wastes time and money.
Signs And Symptoms to Look For:
- More than 1/4" of water loss in your pool/spa over 24 hours.
- Algae forming too soon after a chemical treatment.
- Loose or falling tiles, or cracks.
- Pool/spa has settled into the ground, and cracks appear on the deck or in the shell.
- Adding water on a daily basis or auto fill continuously running.
- Low chemical count due to fresh water being added
- Higher loss when pool runs, or air bubbles appearing from return lines.
- Pump not pulling prime properly.
- Standing water, mushy spots, or uneven grass growth around the pool/spa area.
Try The Bucket Test
- Bring the pool water to normal level.
- Fill a five gallon bucket with pool water to about four inches from the top.
- Place bucket on the first or second step of the pool. Ensure that the bucket is immersed in the pool about half way.
- Mark the water level inside the bucket.
- Shut off pump and auto fill then mark pool level on the outside of the bucket.
- Resume normal pool pump operation, but leave auto fill off.
- After 24 hours, compare the two water levels. If the pool water goes down more than the inside water level there is probably a leak. If the levels are the same, only evaporation has occurred.
If You Suspect a Leak,
CALL US FIRST! 888/777-LEAK
|
|
No comments:
Post a Comment